National Service Hotline

                                              Hot search: Zirconium plate

                                              Your current location: HOME > NEWS > Industry news

                                              Classification of titanium flanges

                                              Date:2022-03-30 14:21:29       Number of views:

                                              Titanium flange is a part made of non-ferrous metal titanium or titanium alloy to connect pipes with each other, which is connected to the pipe end.

                                              There are holes on the titanium flange, and the bolts connect the two flanges tightly. The flanges are sealed with gaskets. Flanged pipe fittings refer to pipe fittings with flanges (lugs or adapters).

                                              It can be cast (not shown), or it can be connected by thread or welded. Flange joint is composed of a pair of flanges, a gasket and several bolts and nuts. The gasket is placed between the two flange sealing surfaces. After tightening the nut, the specific pressure on the gasket surface will deform after reaching a certain value, and fill the uneven parts on the sealing surface to make the connection tight.

                                              Classification of titanium flange

                                              Press to connect components

                                              Titanium flange connection is a detachable connection. According to the connected parts, it can be divided into container titanium flange and pipe titanium flange.

                                              According to the structural form

                                              According to the structural type, there are integral titanium flange, butt welded titanium flange, looper titanium flange and threaded titanium flange.

                                              Titanium flange standard

                                              Titanium flange grades: TA0, TA1, TA2, TA3, TA4, TA5, TA6, TA7, ta9, TA10, Tc1, TC2, TC3, TC4, TC6, TC11, Grade1, Grade2, Grade5, Grade7, grade9, grade12ti6al4v Eli, Ti6Al7Nb, ti13nb13zr, ti1533.

                                              Supply status of titanium flange: R or M

                                              Specification of titanium flange: titanium plate 0.03-20mm * 1000mm * 2000mm titanium foil, thickness of titanium strip 0.01 to 0.1mm Width 120mm Spot 0.03mm to 0.8mm, width from 80 to 500mm, titanium rod (smooth rod) 2mm-250mm * 3000mm, titanium tube diameter from 3 to 120mm, wall thickness from 0.5 to 20mm 4-110mm * 0.8-10MM * 6000mm titanium wire 0.1-8.0mm titanium cake 50mm-500mm * 50mm-1000mm titanium ring diameter 100 to 2020mm, wall thickness 10 to 300mm

                                              Executive Standards: GB / t2965, GB / t228, GB / t2039, GB / t3620 1,GB/T3620. 2,GB/T4338,GB/T4698,GB/T5168,

                                              GB/T5193,GB/T8180,GB/T13810-2007, GB/T2965-2007,ASTM B348, ASTM B381,ASTM F67, ISO5832-2ASTM F136, ISO5832-3, AMS4928, MIL4911,ASTMF1713-08,ASTMF1295,ISO5832-11


                                              Annealing state (m) hot working state (R) cold working state (y) (annealing, ultrasonic flaw detection)


                                              Forged surface, rolled surface, polished surface, polished surface

                                              【Article label】

                                              【Responsible editor】

                                              Latest information